extern crate linux_embedded_hal; use linux_embedded_hal::spidev::{SpiModeFlags, SpidevOptions}; use linux_embedded_hal::sysfs_gpio::Direction; use linux_embedded_hal::Delay; use linux_embedded_hal::{Pin, Spidev}; extern crate ssd1675; use ssd1675::{Builder, Color, Dimensions, Display, GraphicDisplay, Rotation}; // Graphics #[macro_use] extern crate embedded_graphics; use embedded_graphics::prelude::*; // Font extern crate profont; use profont::{ProFont12Point, ProFont14Point, ProFont24Point, ProFont9Point}; use std::process::Command; use std::thread::sleep; use std::time::Duration; use std::{fs, io}; // Activate SPI, GPIO in raspi-config needs to be run with sudo because of some sysfs_gpio // permission problems and follow-up timing problems // see https://github.com/rust-embedded/rust-sysfs-gpio/issues/5 and follow-up issues const ROWS: u16 = 212; const COLS: u8 = 104; #[rustfmt::skip] const LUT: [u8; 70] = [ // Phase 0 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5 Phase 6 // A B C D A B C D A B C D A B C D A B C D A B C D A B C D 0b01001000, 0b10100000, 0b00010000, 0b00010000, 0b00010011, 0b00000000, 0b00000000, // LUT0 - Black 0b01001000, 0b10100000, 0b10000000, 0b00000000, 0b00000011, 0b00000000, 0b00000000, // LUTT1 - White 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, // IGNORE 0b01001000, 0b10100101, 0b00000000, 0b10111011, 0b00000000, 0b00000000, 0b00000000, // LUT3 - Red 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, // LUT4 - VCOM // Duration | Repeat // A B C D | 64, 12, 32, 12, 6, // 0 Flash 16, 8, 4, 4, 6, // 1 clear 4, 8, 8, 16, 16, // 2 bring in the black 2, 2, 2, 64, 32, // 3 time for red 2, 2, 2, 2, 2, // 4 final black sharpen phase 0, 0, 0, 0, 0, // 5 0, 0, 0, 0, 0 // 6 ]; fn main() -> Result<(), std::io::Error> { // Configure SPI let mut spi = Spidev::open("/dev/spidev0.0").expect("SPI device"); let options = SpidevOptions::new() .bits_per_word(8) .max_speed_hz(4_000_000) .mode(SpiModeFlags::SPI_MODE_0) .build(); spi.configure(&options).expect("SPI configuration"); // https://pinout.xyz/pinout/inky_phat // Configure Digital I/O Pins let cs = Pin::new(8); // BCM8 cs.export().expect("cs export"); while !cs.is_exported() {} cs.set_direction(Direction::Out).expect("CS Direction"); cs.set_value(1).expect("CS Value set to 1"); let busy = Pin::new(17); // BCM17 busy.export().expect("busy export"); while !busy.is_exported() {} busy.set_direction(Direction::In).expect("busy Direction"); let dc = Pin::new(22); // BCM22 dc.export().expect("dc export"); while !dc.is_exported() {} dc.set_direction(Direction::Out).expect("dc Direction"); dc.set_value(1).expect("dc Value set to 1"); let reset = Pin::new(27); // BCM27 reset.export().expect("reset export"); while !reset.is_exported() {} reset .set_direction(Direction::Out) .expect("reset Direction"); reset.set_value(1).expect("reset Value set to 1"); println!("Pins configured"); // Initialise display controller let mut delay = Delay {}; let controller = ssd1675::Interface::new(spi, cs, busy, dc, reset); let mut black_buffer = [0u8; ROWS as usize * COLS as usize / 8]; let mut red_buffer = [0u8; ROWS as usize * COLS as usize / 8]; let config = Builder::new() .dimensions(Dimensions { rows: ROWS, cols: COLS, }) .rotation(Rotation::Rotate270) .lut(&LUT) .build() .expect("invalid configuration"); let display = Display::new(controller, config); let mut display = GraphicDisplay::new(display, &mut black_buffer, &mut red_buffer); // Main loop. Displays CPU temperature, uname, and uptime every minute with a red Raspberry Pi // header. loop { display.reset(&mut delay).expect("error resetting display"); println!("Reset and initialised"); let one_minute = Duration::from_secs(60); display.clear(Color::White); println!("Clear"); egtext!( text = "Raspberry Pi", top_left = (1, -4), style = text_style!( font = ProFont24Point, background_color = Color::White, text_color = Color::Red, ) ) .draw(&mut display) .expect("error drawing text"); if let Ok(cpu_temp) = read_cpu_temp() { egtext!( text = "CPU Temp:", top_left = (1, 30), style = text_style!( font = ProFont14Point, background_color = Color::White, text_color = Color::Black, ) ) .draw(&mut display) .expect("error drawing text"); egtext!( text = &format!("{:.1}°C", cpu_temp), top_left = (95, 34), style = text_style!( font = ProFont12Point, background_color = Color::White, text_color = Color::Black, ) ) .draw(&mut display) .expect("error drawing text"); } if let Some(uptime) = read_uptime() { egtext!( text = uptime.trim(), top_left = (1, 93), style = text_style!( font = ProFont9Point, background_color = Color::White, text_color = Color::Black, ) ) .draw(&mut display) .expect("error drawing text"); } if let Some(uname) = read_uname() { egtext!( text = uname.trim(), top_left = (1, 84), style = text_style!( font = ProFont9Point, background_color = Color::White, text_color = Color::Black, ) ) .draw(&mut display) .expect("error drawing text"); } display.update(&mut delay).expect("error updating display"); println!("Update..."); println!("Finished - going to sleep"); display.deep_sleep()?; sleep(one_minute); } } fn read_cpu_temp() -> Result { fs::read_to_string("/sys/class/thermal/thermal_zone0/temp")? .trim() .parse::() .map(|temp| temp as f64 / 1000.) .map_err(|err| io::Error::new(io::ErrorKind::Other, err)) } fn read_uptime() -> Option { Command::new("uptime") .arg("-p") .output() .ok() .and_then(|output| { if output.status.success() { String::from_utf8(output.stdout).ok() } else { None } }) } fn read_uname() -> Option { Command::new("uname") .arg("-smr") .output() .ok() .and_then(|output| { if output.status.success() { String::from_utf8(output.stdout).ok() } else { None } }) }